BMW 325 BMW 325 Engine Removal Engine Removal
[ebay-update keyword="oil filter wrench" category="6000" keys="13,28,36,88"]
The BMW 325 six-cylinder engine is a compact, efficient powertrain and performance-oriented. For different reasons, possibly related to maintenance, adjustment or a major reconstruction, the best option for working on the engine and out of the car. Pulling an engine is not an easy task, but it is not something reserved only for large auto repair facility. The only required to pull an engine not everyone will have in the family garage has a lift motor. Hoists are available, however, most of the industrial businesses.
- Do not even think to remove the engine cover with the BMW 325 as. Removing the cover simply means setting out its attachment to the hinges and lift. It's a good idea, however, to have some help, not only to remove the heavy body panel, but to keep removing the final tie.
Disconnect hoses and son h2> < / li> Next you want to disconnect all the pipes, son, cables and other components leading to and from the engine. Be sure to tighten the fuel line before disconnecting. Drain the oil, coolant, power brakes and steering fluid. The battery cables and air conditioning src="http://images.intellitxt.com/ast/adTypes/mag-glass_10x10.gif" alt="mag-glass_10x10.gif" tube will also be disconnected. The trunks of different wiring for the engine management and control must be switched off. Also, disconnect the linkage of gas and the drive shaft under the engine mounts voiture.Débranchez
- The 325 engine is mounted on four points at each corner. The engine mounts are large rubber pads and retaining bolts brackets connected to the motor. Before removing the engine mounts, drive the hoist motor in place and secure the engine with the hoist chain and hook. One of the engine mounts are disconnected, the engine is free to move inside the bay.
Remove the engine h2> li> The motor does not come straight to the output of the engine bay "http://images.intellitxt.com/ast/adTypes/mag-glass_10x10.gif" . If transmission is connected to the bottom of the engine and must also leave. Lift the front of the first motor so that it is tilted up and the engine speed before lifting slowly. The work of the engine forward and above the radiator. Once the transmission is free to move inside the engine compartment, you can finish the removal of li> ol>